10 Best LiPo Batteries for FPV for 2026
The OVONIC 6S 1300mAh LiPo Battery is the Best Overall pick for a compatible 6S quad. The best lipo batteries for fpv match your quad’s cell count, connector, size and current needs.
For 6S and cruising builds, compare the CNHL 1300mAh 6S LiPo Battery and OVONIC 3S 1300mAh LiPo Battery. For smaller 3S or 4S setups, consider the OVONIC 3S 450mAh LiPo Battery, OVONIC 3S 1300mAh 120C, TATTU R-Line 4S 550mAh LiPo Battery, 300mAh 3S LiHV Battery or TATTU 2S 300mAh LiPo Battery. For 1S whoops, the picks are BETAFPV Lava II 1S 320mAh LiHV Battery and the BETAFPV 5-pack with BT2.0 connectors.
Match cell count and connector to your quad, then weigh pack size, weight and current needs against your build and flying style. A higher C rating alone may not predict real discharge performance because manufacturer ratings can be inflated.
The comparison table covers cells and voltage, connector and capacity.
Our top picks for lipo batteries for fpv
- Best Overall: OVONIC 6S 1300mAh LiPo Battery, for 6S freestyle or racing quads with XT60
- Best for 6S Value: CNHL 1300mAh 6S LiPo Battery, for 5-inch FPV pilots using a compatible 6S quad
- Best for 3S Cruising: OVONIC 3S 1300mAh LiPo Battery, for 3S FPV builds supporting XT60 and this pack size
| OVONIC 6S 1300mAh LiPo Battery |  | Best Overall | Cells / Voltage: 6S, 22.2 V | Connector: XT60 discharge | Capacity: 1300 mAh | VIEW LATEST PRICE | Read Our Analysis |
| CNHL 1300mAh 6S LiPo Battery |  | Best for 6S Value | Cells / Voltage: 6S, 22.2 V | Connector: XT60 | Capacity: 1300 mAh | VIEW LATEST PRICE | Read Our Analysis |
| OVONIC 3S 1300mAh LiPo Battery |  | Best for 3S Cruising | Cells / Voltage: 3S, 11.1 V | Connector: XT60 discharge plug | Capacity: 1300 mAh | VIEW LATEST PRICE | Read Our Analysis |
| OVONIC LiPo Battery 11.1V 120C 1300mAh 3S RC Battery with XT60 Plug for FPV |  | Best for 3S Racing | Cells / Voltage: 3S, 11.1 V | Connector: XT60 | Capacity: 1300 mAh | VIEW LATEST PRICE | Read Our Analysis |
| OVONIC 3S 450mAh LiPo Battery |  | Best for 3S Micro Quads | Cells / Voltage: 3S, 11.1 V | Connector: XT30 discharge plug | Capacity: 450 mAh | VIEW LATEST PRICE | Read Our Analysis |
| TATTU R-Line 4S 550mAh LiPo Battery |  | Best for 4S Toothpicks | Cells / Voltage: 4S, 14.8 V | Connector: XT30 | Capacity: 550 mAh | VIEW LATEST PRICE | Read Our Analysis |
| BETAFPV Lava II 1S 320mAh LiHV Battery |  | Best for Punchy Tiny Whoops | Cells / Voltage: 1S, 3.8 V | Connector: JST-PH2.0 | Capacity: 660 mAh | VIEW LATEST PRICE | Read Our Analysis |
| 300mAh 3S LiHV Battery |  | Best for 3S Toothpicks | Cells / Voltage: 3S, 11.4 V | Connector: XT30 | Capacity: 300 mAh | VIEW LATEST PRICE | Read Our Analysis |
| TATTU 2S 300mAh LiPo Battery |  | Best for 2S Micro Quads | Cells / Voltage: 2S, 7.4 V | Connector: XT30 | Capacity: 300 mAh | VIEW LATEST PRICE | Read Our Analysis |
| BETAFPV 5pcs Lava II 1S 320mAh LiHV Battery 3.8V 95C with BT2.0 Connector |  | Best for BT2.0 Whoops | Cells / Voltage: 1S, 3.8V nominal | Connector: BT2.0 | Capacity: 320 mAh | VIEW LATEST PRICE | Read Our Analysis |
More Details on Our Top Picks
OVONIC 6S 1300mAh LiPo Battery
For 6S freestyle or racing, the OVONIC 1300mAh offers a well-rounded setup with a common capacity and XT60 connector. Its 6S, 22.2 V pack is rated at 100C and holds 1300mAh, giving you a familiar configuration for compatible quads. The soft-case battery measures 73 × 43 × 34 mm and weighs 225 g, so you can compare its size and mass with your frame’s battery space and flight needs. Its balance connector is JST-XHR-7P.
The XT60 discharge lead and JST-XHR-7P balance lead make the connection types clear when fitting the pack and charging it. Owners report predictable flight time and strong punch, though one owner noticed minor voltage sag near 3.7 V. This standard LiPo charges to 4.20 V per cell; don’t set a LiPo charger to LiHV voltage.
Pros: FPV reviewer praised the 6S pack’s build and packaging (2021) · Reviewer measured 1415 mAh charged capacity (2021) · Predictable flight time and strong punch (manufacturer reviews, accessed 2026).
Cons: Owner noted minor voltage sag near 3.7 V (manufacturer review, accessed 2026) · Independent reviewer’s flight tests focused on the 4S pack, not 6S (2021).
Choose a different pack if your quad’s discharge connector isn’t XT60.
- Cells / Voltage:6S, 22.2 V
- Connector:XT60 discharge
- Capacity:1300 mAh
- Dimensions:73 × 43 × 34 mm
- Weight:225 g
- Chemistry:LiPo (lithium polymer)
CNHL 1300mAh 6S LiPo Battery
Its 130C discharge rating suits 5-inch pilots seeking 6S power at 1300mAh without buying packs individually. The CNHL 1300mAh 6S LiPo Battery comes as a pair, with each pack rated at 22.2 V nominal and fitted with an XT60 connector. That gives you two packs for compatible 6S quads, with a stated capacity aimed at FPV use. Each battery weighs approximately 223 g, so pack weight is a meaningful part of your build’s total flying weight.
The XT60 plug and compact 48 × 33 × 77 mm dimensions make the key installation details clear, while the two-pack quantity gives you a spare for another flight. The main drawback is that some owners report fragile heat-shrink wrapping, alongside reports of strong power delivery and occasional battery sag. These are standard LiPo packs, with a 4.20 V-per-cell charge limit, so the 6S pack’s fully charged voltage is 25.2 V. Two batteries per pack is the practical value here, provided your quad can carry their weight.
Pros: Some FPV owners report good value · Strong power delivery.
Cons: Occasional dead or failed cells · Some owners report battery sag.
A 5-inch quad needs an XT60 connector and room for a 223 g battery to use this pack.
- Cells / Voltage:6S, 22.2 V
- Connector:XT60
- Capacity:1300 mAh
- Dimensions:48 × 33 × 77 mm
- Weight:223 g
- Chemistry:Lithium polymer (LiPo)
OVONIC 3S 1300mAh LiPo Battery
For compatible XT60 3S FPV builds, this pack suits cruising with a 1300 mAh capacity and compact footprint. It delivers 11.1 V nominal voltage with a 50C discharge rating, and weighs 117 g. One owner reports 8–10 minutes of cruising on a 5-inch ultralight build at 300 g AUW, giving you a useful runtime reference for that setup.
The soft-case pack measures 69 × 31 × 20 mm, with an XT60 discharge plug and JST-XHR-4P balance connector for compatible setups. An owner says the pack worked well for the reported cruising use, though the balance and main leads could be longer. Its 1300 mAh capacity makes it a focused option for 3S cruising builds with room for this pack.
Pros: Owner reported successful use on a 5-inch ultralight FPV build · Owner said the pack worked well for the stated use (2023).
Cons: Owner said the balance and main leads could be longer (2020).
This pack won’t suit a build that requires longer balance and main leads.
- Cells / Voltage:3S, 11.1 V
- Connector:XT60 discharge plug
- Capacity:1300 mAh
- Dimensions:69 × 31 × 20 mm
- Weight:117 g
- Chemistry:LiPo (lithium polymer)
OVONIC LiPo Battery 11.1V 120C 1300mAh 3S RC Battery with XT60 Plug for FPV
Unlike the OVONIC 6S 1300mAh pack, this two-pack suits 3S racing quads built around XT60. Each battery is a 3S1P LiPo with 1300 mAh capacity and a listed 120C discharge rating. The XT60 plug handles discharge, while a JST-XHR-4P connector is used for balance charging. Each pack measures 73.64 × 35.74 × 22.39 mm and weighs 120 g.
The bundle includes two batteries and a voltage checker, so you get a spare pack for a session. The 120 g pack weight and compact dimensions make it a defined fit for a 3S frame, while the XT60 connector keeps installation focused on compatible power leads. One drawback: an FPV forum user reported that two 1300 mAh packs developed a weak cell and voltage sag. Each battery’s 11.1 V nominal output is intended for a 3S setup, not a higher-cell-count quad.
Cons: FPV forum user reports two 1300 mAh packs developed a weak cell and voltage sag.
This pack won’t fit a quad configured for 4S or any cell count other than 3S.
- Cells / Voltage:3S, 11.1 V
- Connector:XT60
- Capacity:1300 mAh
- Dimensions:73.64 × 35.74 × 22.39 mm
- Weight:120 g
- Chemistry:Lithium polymer (LiPo)
OVONIC 3S 450mAh LiPo Battery
Pilots of 80–130 mm FPV quads that run 3S can use this as a compact micro-quad pack. The OVONIC 3S 450mAh LiPo Battery supplies 11.1 V through an XT30 plug, with an 80C discharge rating. Its 450 mAh capacity and 35 g weight suit smaller builds, while 50 × 24 × 12 mm dimensions give you a clear size reference. The four-pack includes four batteries and a user manual.
The XT30 discharge plug and JST-XHR-4P balance connector suit a compatible 3S setup, and the compact dimensions help you judge space in a small frame. Owners report good power for its intended use, though one FPV pilot reported just 3–4 minutes of flight time on these 450 mAh 3S packs. That short flight time may limit sessions if you want longer runs between battery swaps.
Pros: Good power for its intended use (2026 manufacturer product reviews) · An FPV pilot reports using Ovonic 450 mAh 3S packs (2025 Reddit post).
An XT30 connector is required for this pack on a 3S micro quad.
- Cells / Voltage:3S, 11.1 V
- Connector:XT30 discharge plug
- Capacity:450 mAh
- Dimensions:50 × 24 × 12 mm
- Weight:35 g
- Chemistry:Lithium-polymer (LiPo)
TATTU R-Line 4S 550mAh LiPo Battery
Owners most often report strong power delivery, making this a 4S toothpick option for small quads. The TATTU R-Line 4S 550mAh pack pairs 550mAh capacity with a 95C discharge rating and an XT30 connector. Owners also report limited voltage sag, a good fit on a 3-inch quad, and 3-minute freestyle flights. Flight time varies with the quad and flying style, so those reports are examples, not a runtime guarantee.
Its 60g weight and 69 × 19 × 22 mm dimensions give you specific measurements for planning a compact build. The XT30 lead suits small 4S toothpick and 3-inch quads, while the 4S1P configuration delivers 14.8 V nominal. One FPV owner reports voltage dropping rapidly below 3.5 V, so pay attention to voltage during a flight. This pack’s fit and connector make it a focused match for compact XT30 toothpick builds.
Pros: Strong power delivery (2021, 2023) · Limited voltage sag (2023) · One owner reports a good fit for a 3-inch quad (2025).
Cons: One FPV owner reports rapid voltage drop below 3.5 V (2025) · Reported flight times vary with quad and flying style (2025).
Your quad needs the matching cell count and an XT30 battery lead for this pack.
- Cells / Voltage:4S, 14.8 V
- Connector:XT30
- Capacity:550 mAh
- Dimensions:69 × 19 × 22 mm
- Weight:60 g
- Chemistry:LiPo
BETAFPV Lava II 1S 320mAh LiHV Battery
Its 1S LiHV cell suits tiny-whoop pilots after a punchy setup, with a JST-PH2.0 connector for compatible quads. The pack is rated at 95C, and its capacity is 320 mAh. It weighs 8.2 g and measures 64 × 10.5 × 6.5 mm, keeping the pack compact for small builds. 90C discharge rating gives this battery its punch-focused profile, while 81 g weight helps keep added mass low.
Installation centers on the JST-PH2.0 connection and the pack’s compact dimensions. For charging, use the LiHV setting only when both the battery and quad support charging to 4.35 V per cell; charging a standard LiPo to that voltage can be dangerous. Its 1S format is intended for tiny whoops rather than larger quads.
Cons: Less agility than with lighter 300 or 450 mAh packs (2022 forum discussion) · A 660 mAh pack may fit tightly in the Mobula7 battery holder (2022 forum discussion).
Its 660 mAh capacity may fit tightly in some tiny-whoop battery holders.
- Cells / Voltage:1S, 3.8 V
- Connector:JST-PH2.0
- Capacity:660 mAh
- Dimensions:60 × 17 × 7 mm
- Weight:81 g
- Chemistry:LiPo
300mAh 3S LiHV Battery
Toothpick pilots who need a compact 3S pack get a fitting option for Beta75X-class builds. The Crazepony 300mAh LiHV pack uses a 3S, 11.4 V setup and an XT30 connector, with 80C continuous and 160C burst ratings for current demand. Its 53 × 17 × 15.5 mm body weighs 28.93 g, keeping the pack small for micro and toothpick frames.
The XT30 lead and 18 AWG wire give you a direct connection on compatible builds. At 300mAh, capacity is suited to a small 3S quad rather than a larger craft needing a longer flight. LiHV charging is the main handling point: use a LiHV setting, since LiHV can charge to 4.35 V per cell and standard LiPo packs must not be charged to that voltage. This pack’s 11.4 V rating identifies its 3S LiHV setup.
Pros: FPV forum commenter describes the black 80C/160C GNB version as solid (2020) · XT30 connector stated in listing (2026) · Manufacturer lists Beta75X among compatible models (2026).
Skip it if: your quad uses a different connector or cannot take a 53 × 17 × 15.5 mm 3S pack.
- Cells / Voltage:3S, 11.4 V
- Connector:XT30
- Capacity:300 mAh
- Dimensions:53 × 17 × 15.5 mm
- Weight:28.93 g
- Chemistry:LiHV
TATTU 2S 300mAh LiPo Battery
At 300 mAh, this four-pack suits 2S micro-quad pilots who want compact packs for swapping between flights. It delivers 7.4 V from a 2S1P setup, with a 45C discharge rating and an XT30 plug. The 46 × 16 × 14 mm size suits the listed 80–150-size micro multirotor class, while 20 g per pack keeps each battery light. The set gives you four batteries, so you can change packs between short flights instead of waiting to recharge one.
The XT30 plug connects to a matching quad battery lead, and the compact hardcase pack is easy to handle between flights. Owners report good replacement-pack performance and say XT30 works for higher-current use. Capacity is the main limit: pilots report roughly 1–2 minutes on some 2S micro setups, so bring spare packs for longer sessions.
TATTU includes 60-day money-back coverage and an 18-month warranty. Each pack is a 7.4 V, 300 mAh LiPo.
Pros: FPV owner reported good performance as a replacement 2S 300 mAh pack (2023) · FPV owner said the XT30 connector suited higher-current use (2023) · Listing specifies compact 46 × 16 × 14 mm dimensions.
Cons: Connector must match the quad’s battery lead · Owner feedback warns that Tattu 300 mAh packs may vary by version (2018).
Use another pack if your quad runs 3S or more; this one is for 2S.
- Cells / Voltage:2S, 7.4 V
- Connector:XT30
- Capacity:300 mAh
- Dimensions:46 × 16 × 14 mm
- Weight:20 g
- Chemistry:LiPo
BETAFPV 5pcs Lava II 1S 320mAh LiHV Battery 3.8V 95C with BT2.0 Connector
For Air65 and Meteor65 Pro whoops, its BT2.0 plug suits pilots seeking punch from a 1S setup. This tiny-whoop pack adds a 95C discharge rating and 320 mAh capacity in an 8.2 g battery. Its 64 × 10 × 6 mm body uses Z-folding cells, and its 3.8 V nominal LiHV voltage can reach 4.35 V only when the battery and quad support LiHV.
Plugging it into a compatible BT2.0 quad is straightforward, though some pilots report a tight connector fit. Pilots describe a snappy throttle feel, while one Air65 II owner reported 3–4-minute flights with calm flying. Flight time changes with your style and setup, and sustained full throttle has caused voltage sag below 3 V. For pilots comparing the best lipo batteries for fpv, this is a compact 1S option with a specific connector fit and punch-focused rating.
Pros: Pilots reported responsive, snappy throttle feel (2026) · One Air65 II owner reported 3–4-minute flights when flying calmly (2026) · One independent reviewer measured 323 mAh capacity (2026).
Cons: Some pilots reported tight BT2.0 connector fit (2026) · A pilot reported voltage sag below 3 V during sustained full throttle (2026).
For an NX69-equipped 1S whoop, this BT2.0 pack won’t connect.
- Cells / Voltage:1S, 3.8V nominal
- Connector:BT2.0
- Capacity:320 mAh
- Dimensions:64 × 10 × 6 mm
- Weight:8.2 g
- Chemistry:LiHV
LiPo Batteries for FPV: Key Specs Side by Side
Here is how the 10 picks line up on cells / voltage, connector, capacity, dimensions and weight. Cells marked with a dash are specs the maker leaves out of its listing.
| Pick | Cells / Voltage | Connector | Capacity | Dimensions | Weight |
|---|---|---|---|---|---|
| OVONIC 6S 1300mAh LiPo Battery | 6S, 22.2 V | XT60 discharge | 1300 mAh | 73 × 43 × 34 mm | 225 g |
| CNHL 1300mAh 6S LiPo Battery | 6S, 22.2 V | XT60 | 1300 mAh | 48 × 33 × 77 mm | 223 g |
| OVONIC 3S 1300mAh LiPo Battery | 3S, 11.1 V | XT60 discharge plug | 1300 mAh | 69 × 31 × 20 mm | 117 g |
| OVONIC LiPo Battery 11.1V 120C 1300mAh 3S RC Battery with XT60 Plug for FPV | 3S, 11.1 V | XT60 | 1300 mAh | 73.64 × 35.74 × 22.39 mm | 120 g |
| OVONIC 3S 450mAh LiPo Battery | 3S, 11.1 V | XT30 discharge plug | 450 mAh | 50 × 24 × 12 mm | 35 g |
| TATTU R-Line 4S 550mAh LiPo Battery | 4S, 14.8 V | XT30 | 550 mAh | 69 × 19 × 22 mm | 60 g |
| BETAFPV Lava II 1S 320mAh LiHV Battery | 1S, 3.8 V | JST-PH2.0 | 660 mAh | 60 × 17 × 7 mm | 81 g |
| 300mAh 3S LiHV Battery | 3S, 11.4 V | XT30 | 300 mAh | 53 × 17 × 15.5 mm | 28.93 g |
| TATTU 2S 300mAh LiPo Battery | 2S, 7.4 V | XT30 | 300 mAh | 46 × 16 × 14 mm | 20 g |
| BETAFPV 5pcs Lava II 1S 320mAh LiHV Battery 3.8V 95C with BT2.0 Connector | 1S, 3.8V nominal | BT2.0 | 320 mAh | 64 × 10 × 6 mm | 8.2 g |
Chart of the table above.
Frequently Asked Questions
Should I use a 4S or 6S battery for my FPV drone?
Use the cell count your quad supports: a 4S pack suits a 4S setup, and a 6S pack suits a 6S setup. A standard 6S LiPo is 22.2 V nominal and reaches 25.2 V fully charged, so the higher cell count changes the voltage your quad receives. Match the connector, pack size, weight, and current needs to your build.
What battery capacity should I choose for my FPV build?
Choose capacity based on the flight time you want and the weight and dimensions your build can handle. Packs in the available range include 320 mAh for 1S whoops and 1300 mAh for larger 3S or 6S setups, but cell count and fit matter alongside capacity. A higher C rating alone may not predict real discharge performance because manufacturer ratings can be inflated.
How much flight time can I expect from an FPV LiPo?
Expect flight time to vary with your quad, battery capacity, and flying style; owner reports offer examples, not a dependable guarantee. One 450 mAh 3S pack has a reported 3–4-minute flight, while a 1300 mAh 3S pack has a reported 8–10 minutes cruising on a 5-inch ultralight build at 300 g AUW. Those setups differ, so use the reports as rough references rather than direct comparisons.
How should I charge and store FPV LiPo batteries safely?
Charge standard LiPo cells to a maximum of 4.20 V each, and use the correct battery type setting when charging LiPo and LiHV packs. Charging a standard LiPo to 4.35 V per cell can be dangerous. For LiHV, use the higher 4.35 V-per-cell charge only when the battery and quad support it.
Can I charge a LiHV battery as a standard LiPo?
Yes, charge it using the standard LiPo limit of 4.20 V per cell, rather than the LiHV limit of 4.35 V per cell. LiHV can deliver more power during the first half of discharge because of its higher voltage, while its performance is similar to standard LiPo later.
Conclusion
Choose a battery by matching its cell count and connector to your quad, then compare pack size, weight, and current rating against your build and flying style. For a lightweight micro quad, focus on smaller packs; for a larger freestyle or racing setup, compare the 6S options. The best lipo batteries for fpv are the ones that fit your setup without adding more weight or capacity than you need. Pick your preferred pack, then use its listed dimensions and connector to narrow your choice.
Sources
- oscarliang.com (oscarliang.com)
- Best LiPo Batteries for Micro FPV Drones (1S, 2S, 3S, 4S | 300mAh to 1000mAh) (oscarliang.com, 2026-08-24T00:00:14+01:00)
